Proceedings of the 10th Convention of the
European Acoustics Association
Forum Acusticum 2023


Politecnico di Torino
Torino, Italy
September 11 - 15, 2023





Session: A06-02: Wind Tunnel Testing in Aeroacoustics - Part I
Date: Thursday 14 September 2023
Time: 11:00 - 11:20
Title: Perforation Ratio Evaluation of Liner Treatments by Experimental Approaches with Acoustical and Optical Methods
Author(s): J. Derré, Airbus Operations SAS, 316 route de Bayonne, 31060 Toulouse Cedex, France
M. Gomes, Airbus Operations SAS, 316 route de Bayonne, 31060 Toulouse Cedex, France
N. Sauron, Expleo France, 13 rue Marie Louise Dissard, 31300 Toulouse, France
T. Abily, Expleo France, 13 rue Marie Louise Dissard, 31300 Toulouse, France
Pages: 4543-4550
DOI: https://www.doi.org/10.61782/fa.2023.0448
PDF: https://dael.euracoustics.org/confs/fa2023/data/articles/000448.pdf
Conference proceedings
Abstract

The proposed study compares the perforation ratio estimation of aeronautic liner treatments by acoustic experimental approach, with an image post-processing evaluation method. This need is directly linked to the importance of the perforated sheet lying on the upper part of the treatment, which coupled with the backwards cavities, composes the liner, whose goal is to attenuate the aircraft engine noise. Aside from being the entry door of the treatment, the resistive sheet is the part directly subjected to the aerodynamic flow, leading to efficiency loss due to the drag. Therefore, the perforation of this plate is of paramount importance, and its ratio to the global sheet area plays an important role in it, combined with the perforation shapes and surface roughness. Indeed, the manufacturing tolerances and material defects might impact the resulting percentage of open area, and thus it has to be evaluated directly on the final product. The study presents two approaches with their advantages, limitations and biases: an acoustical evaluation with the Guess model based on experimental impedance testbench data, and a high-resolution image processing based on holes identification by Hough transform and counting.